Message Window Displays - AT&T E2727B User Manual

1 4
Message window
Answering System Operation

Message window displays

The message counter usually displays the total number of
memos and incoming messages. See the list below for
explanations of other displays in this counter.
Message counter displays
0 No messages.
1-98
Number of messages/memos, or message number
currently playing (flashes if you have new mes-
sages).
10-99
Current remote access code while setting
(see page 32).
1-8
Current volume level while adjusting.
1-99 (counting)
Elapsed time while recording a memo (see page 34)
or announcement up to 90 seconds (page 30).
99 (flashing)
Memo recording exceeded 99 seconds.
F (flashing)
Memory is full. Messages must be deleted before
new messages can be received.
CL (flashing)
Clock needs to be set (see page 29).
A Announcement Only mode is on (see page 31).
--
System is answering a call, or being accessed
remotely.
-- (flashing)
System is being programmed or initialized.
On (or) OF
Displayed for one second when any feature
option setting is turned on or off.
02, 04, 06, tS
Current number of rings while setting (see page
32).
35