Inserting And Removing Optical Discs - HP Compaq Series Hardware And Software Manual

Inserting and Removing Optical Discs

✎
Your notebook may look slightly different from the illustrations
in this section.
Inserting an Optical Disc
1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release the
media tray.
3. Pull the tray out 2 until it is fully extended. Position a CD or
one-sided DVD over the tray with the label side up.
4. Gently press the disc 3 onto the tray spindle until the disc
snaps into place. Handle the disc by the edges, not the flat
surfaces. If the media tray is not fully extended, tilt the disc
to position it over the tray spindle, and then press it into
position.
5. Close the media tray.
✎
After you insert a DVD, a short pause is normal as Autorun opens
the DVD and WinDVD player.
Hardware and Software Guide
Hardware Components
5–9