Table of Contents
Advertisement
NOTE:
power settings on page
If the computer is on or in the Sleep state, the computer remains briefly in the Sleep state, and then
shuts down and loses any unsaved information.
Resolving a low battery level
Resolving a low battery level when external power is available
Connect one of the following devices:
▲
AC adapter
●
Optional docking or expansion device
●
Optional power adapter purchased as an accessory from HP
●
Resolving a low battery level when no power source is available
To resolve a low battery level when no power source is available, save your work and shut down the
computer.
Inserting or removing the battery
Inserting a battery
Inserting a battery
To insert the battery:
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Insert the battery (1) into the battery bay until it is seated.
The battery release latch (2) automatically holds the battery in place. Slide the battery lock (3)
outwards to lock the battery securely in place.
Removing a battery
To remove the battery:
CAUTION:
information. To prevent loss of information, save your work and shut down the computer through
Windows before removing the battery.
34
Chapter 6 Power management
For additional information about the power meter, see
31.
Removing a battery that is the sole power source for the computer can cause loss of
Using the power meter and
Advertisement
Table of Contents
