Selecting from the Security Menu
.
Select
Administrator password
Power-On password
Password options
DriveLock passwords
Smart card security
Device security
System IDs
Hardware and Software Guide
To Do This
Enter, change, or delete an administrator
password.
Enter, change, or delete a power-on
password.
Enable/disable stringent security and
password requirement on restart.
Enable/disable DriveLock; change a
DriveLock user or master password.
✎
DriveLock settings are accessible
only when you enter Computer
Setup by turning on (not restarting)
the notebook.
Enable/disable support for smart card
authentication on boot.
✎
This feature is supported only by
certain smart card readers. Refer to
Chapter 7, "Security"
■
Enable/disable serial, infrared, and
parallel ports, the wireless button, and
the SD slot.
■
Enable/disable CD-ROM, floppy, and
NIC boot.
■
Select NIC boot mode.
Enter user-defined notebook asset and
ownership tag.
Computer Setup
in this guide.
9–5