Inserting And Removing A Sim (Select Models Only); Using Gps (Select Models Only) - HP Elitebook 9480m User Manual

Inserting and removing a SIM (select models only)

CAUTION:
To insert a SIM, follow these steps:
1. Turn off the computer by using the Shut down command.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the battery bay toward you.
6. Remove the battery.
7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE:
NOTE:
inserted into your computer.
8. Replace the battery.
NOTE:
9. Reconnect external power.
10. Reconnect external devices.
11. Turn on the computer.
To remove a SIM, press in on the SIM, and then remove it from the slot.

Using GPS (select models only)

Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites
deliver location, speed, and direction information to GPS-equipped systems.
For more information, see the HP GPS and Location software Help.
20 Chapter 3 Connecting to a network
To prevent damage to the connectors, use minimal force when inserting a SIM.
The SIM in your computer may look slightly different from the illustration in this section.
See the image on the battery bay to determine which way the SIM card should be
HP Mobile Broadband will be disabled if the battery is not replaced.