General Safety Rules - Ryobi RBV26B User Manual

Hide thumbs Also See for RBV26B:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 13
Deutsch (Übersetzung der originalen Anleitungen)
WARNING
When using the product, the safety rules must be
followed. For your own safety and that of bystanders,
please read these instructions before operating the
product. Please keep the instruction safe for later use.
WARNING
sensory or mental capabilities to operate, clean or
maintain the product. Local regulations may restrict the
age of the operator.
the presence of children. Children are often attracted to
assume that children will remain where you last saw them.
care of a responsible adult other than the operator, be
alert and turn the product off if a child enters the area.

GENERAL SAFETY RULES

Some regions have regulations that restrict the use of
the product to some operations. Check with your local
authority for advice. Read all instructions.
Do not allow children or untrained individuals to use
this unit.
Ensure before each use that all controls and safety
devices function correctly. Do not use the tool if the
"off" switch does not stop the engine.
ventilated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all
string which can be blown a considerable distance by
high velocity air.
Wear full eye and hearing protection while operating
permanent hearing may result if precautions to
limit our exposure, reduce noise and wear hearing
protection are not strictly adhered to.
Wear heavy long trousers, boots, and gloves. Do not
any kind, or use with bare feet.
Secure long hair so it is above shoulder level to
prevent entanglement in moving parts.
children, and pets at least 15 m away from work area.
Operate the machine only at reasonable hours – not
early in the morning or late at night when people might
English (Original instructions)
If the machine is dropped, suffers heavy impact or
begins to vibrate abnormally, immediately stop the
machine and inspect for damage or identify the cause of
the vibration. Any damage should be properly repaired
or replaced by an authorised service centre.
11
11
be disturbed.
Use rakes and brooms to loosen debris before
Do not use this machine when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
a clear view of the work area to identify potential
hazards.
Use of hearing protection reduces the ability to hear
extra attention to what is going on in the working area.
Only use enough throttle (power) to complete the task,
and vibration.
Operating similar tools nearby increases both the risk
enter your working area.
Overreaching can result in loss of balance or exposure
to hot surfaces.
the engine and ensure impeller blades have stopped
changing tubes, opening or removing debris bag.
Do not touch the area around the silencer or engine
of the unit, these parts get very hot during operation.
Inspect the machine before each use. Check for loose
fasteners, fuel leaks, etc. Make sure all guards, and
handles are properly and securely attached. Replace
any damaged parts before use.
attached. When used as a blower, always install the
blower tubes and close the door. When used as a
vacuum, always install the vacuum tubes and vacuum
bag.
Do not modify the machine in any way or use parts
and accessories which are not recommended by the
manufacturer.
WARNING
Stop the engine and allow it to cool before refueling,
storing or transporting the machine.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents