Dfud 140 Fault Tracing - Viking DFUD040 Manual

Fault Tracing: Press TEMP (6) five times
and then:
1) Press Normal (2) to start Inlet Valve 2
(Not on all models)
2) Press China (3) to start Inlet Valve 1
3) Press Rinse (4) to start Combination
Dispenser
4) Press Econo (5) to start Heater
5) Press Temp (6) to start Circulation
Pump
6) Press Heat Dry (7) to start Drain Pump
(and Fan/Vax motor VUD040)
7) Press Delay (8) to start Fan/Vax Motor
(not DFUD040)
Press Start/ Stop to exit Fault Mode.
Drain Time Adjustments: Press China
(3) five times to Enter Reprogramming
Mode.
1) Press China (3) to get 20 seconds
Drainage Time
2) Press Rinse (4) to get 25 seconds
Drainage Time
3) Press Econo (5) to get 35 seconds
Drainage Time.
4) Press Temp (6) to get 45 seconds
Drainage Time.
5) Press Heat Dry (7) to get 85 seconds
Drainage Time.
Extra Rinse: You can get an extra rinse
in the programs, Pots, Normal and China
by doing this:
1) Press Normal (2) five times within 15
seconds. Then you get into the changing
program. The program will show how
many rinses the machine last gave, and
you get an extra rinse or press Rinse and
you get the normal number of rinses.
Inlet Time: Press Econ (5) five times
to Enter Reprogramming Mode.
1) Press China (3) to get normal Inlet
Time (Default)
2) Press Rinse (4) to get 25% increase
(75 sec.)
3) Press Econo (5) to get 50% increase
(90 sec.)
4) Press Temp (6) to get 100%
increase (120 sec.)
5) Press Heat Dry (7) to get 150%
increase (150 sec.)
6) Press Delay (8) to get 200% increase
(180 sec.)
Protected Start Program: Press Rinse
and Hold (5) five times and then:
1) Press Econo (5) once for Protected
Start (3 sec.)
2) Press Rinse (4) once for Normal
Start.
Extended Fan Cooling: You can cool
down the washing items under 30
minutes after heated drying by the fan
cooling. Press Econo (5) for extended
fan cooling.
1) Press Pots (1) five times within 15
seconds. Then you get into the
changing program.
2) Press Rinse (4) and you get 30
minutes extra fan cooling, or press
China and you get the normal fan
cooling.
Geographical location of switches on the
keyboard. (Some switches are not
displayed on some models.)
13