Viking DFUD040 Manual page 24

Designer series
Hide thumbs Also See for DFUD040:
Table of Contents

Advertisement

PROBLEM
Chipping or breaking
of glassware
Unusual noise
Dishwasher will not
Fill.
POSSIBLE CAUSE
Plastic items.
Improper loading or
unloading
Dry cycle interrupted
Improper loading
Improper loading
Door open
Controls
Water feed line
Water supply
23
SUGGESTED REMEDY
Certain
plastic
materials
difficult to dry. Plastics may need
towel drying.
Do not overload or nest items. Be
sure all surfaces drain well. Load
items with concave bases so as
much water as possible can run off.
Unload the lower rack first. Water
from dishes in the upper rack may
be spilling onto the lower rack.
If the door is opened during the
heated dry cycle, the heating
element comes back on after the
door is closed. If the dishwasher
door is opened immediately after
the dry cycle is completed and then
shut again, the vent door is closed,
trapping warm humid air. It is best
then to leave door open slightly.
Do not overload. Load between
prongs, not over them.
loaded
over
prongs
supported and may break. make
sure glassware is secure. Always
use upper rack for delicate items.
Use the light/china cycle.
Utensils may not be secure or may
have dropped from the rack. Water
may cause utensils to rattle. Make
sure everything is securely placed
in dishwasher.
Check that door is firmly closed.
Check that dishwasher is on.
Check to see that the water feed
line is not crimped.
Be sure water is available and
turned on.
are
Glasses
are
not

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfud142Dfud140Dfud042

Table of Contents