91-5743-10-00.E2125.RO.qxd
Getting Started
Battery installation & charging
After installation, place the handset in the base and allow to charge for 15 hours before
use. You can keep battery charged by returning the handset to the base after each use.
When battery is fully depleted, a recharge takes about 10 hours.
Press coin into slot on
base of handset to
release latch, then
remove battery cover.
Insert top
tabs first
2/13/1950
7:21 PM
Press down to
click in place
7
Page 7
LOW BATTERY
Low battery indicator
Return handset to base to recharge
when this symbol flashes. (Handset
will beep when battery is low.)
Insert supplied
battery pack
Caution: Use only supplied
rechargeable battery or AT&T
replacement battery model
2420 (SKU 00578).
Place handset in base to charge
for 15 hours before first use.