Table of Contents
Advertisement
91-5743-10-00.E2125.RO.qxd
1
TIME SET
"Friday, 10:07 am, 2003"
"To change clock,
press Time Set"
2
TIME SET
"Friday"
3
CHANGE
"Monday"
Press until correct day is spoken.
4
TIME SET
"10 am"
5
CHANGE
"2 pm"
Press until correct hour is spoken.
6
TIME SET
"07"
7
CHANGE
"26"
Press until correct minute is spoken.
8
TIME SET
"2003"
9
@
CHANGE
"2004"
Press until correct year is spoken.
10
@
TIME SET
"Monday, 2:26 pm, 2004"
2/13/1950
7:21 PM
Answering System Operation
Day and time announcements
To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
Before using the answering system, you should follow
the steps at left to set the day and time, so messages
are dated correctly.
The system uses voice prompts to guide you. Each time
you press
CHANGE
advances by one. When you hear the correct setting,
press
to move to the next setting.
TIME SET
To check day and time
You can press
TIME SET
current day and time without changing it.
NOTE: Press and hold
(the year can be set from 2000 to 2039).
NOTE: After you set the time once, it will thereafter be set automatically
with incoming Caller ID information. The time will be set automatically only if you
subscribe to Caller ID service provided by your local telephone company (see
page 5).
21
Page 21
, the day, hour, minute or year
at any time to hear the
to advance the minute or year by 10
CHANGE
Advertisement
Table of Contents
