Outgoing Announcements - AT&T E2125 User Manual

2.4 ghz cordless telephone/answering system
Hide thumbs Also See for E2125:
Table of Contents

Advertisement

91-5743-10-00.E2125.RO.qxd
14
Elapsed
Press to stop
recording time
recording.
(seconds).
1
MENU
"Change
announcement"
2
(Play/Stop)
(Plays announcement
previously recorded).
Or
2
RECORD
"Now recording..."
3
Speak into microphone.
Microphone
4
(Play/Stop)
(Announcement is
played back).
2/13/1950
7:21 PM
Answering System Operation

Outgoing announcements

Outgoing announcements are the messages callers hear
when calls are answered by the answering system.
The phone is pre-programmed with an announcement
that answers calls with "Hello. Please leave a message
after the tone." You can use this announcement, or
replace it with a recording of your own voice.
To record your outgoing announcement
Press
until you hear "Change announcement."
MENU
Then press
and begin speaking after you hear
RECORD
"Now recording." Speak facing the telephone base from
about 9 inches away.
Elapsed time (in seconds) will be shown in the message
window as you record. You can record an announce-
ment up to 90 seconds long. Announcements less than 3
seconds long will not be recorded.
To delete your outgoing announcement
Press
until you hear "Change announcement,"
MENU
then press
PLAY/STOP
during playback to delete your announcement.
When your announcement is deleted, calls will be
answered with the pre-programmed announcement
described above.
22
Page 22
to begin playback. Press
DELETE

Advertisement

Table of Contents
loading

Table of Contents