Other Operations; Entering Text; Switching The Aspect Ratio Of The Screen; Hold Function - Panasonic DMR-HWT250 Operating Instructions Manual

Convenient functions

Other operations

Entering text

Preparation
• Show the "Enter Title Name" screen, etc.
1
Select a character, then press [OK].
Repeat this step to enter other characters.
e.g.,
Name field:
Enter Title Name
1 2 3 4 5
 Shift
q w e r t
a
s d f g
z x c v b
/ : ~ _
Alphanumeric
Symbols
OK
RETURN
• To enter Alphanumeric characters:
Press the green button, then select
characters.
• To enter Symbols:
Press the red button, then select
characters.
• To enter Other Characters, such as umlaut
mark or accent grave:
Press the yellow button, then select
characters.
• To delete a character:
Select the character in the name field, then
press [PAUSE ;].
• To shift the alphabetic characters on the
screen to upper case/lower case:
Press [PLAY/a1.3 1].
2
Press [STOP ∫] (Finish).
"Writing..." appears then the screen returns
to the previous screen and so on.
To end partway
Press [RETURN ]. (Text is not added.)
• The maximum number of characters depends on the
media.
• If a name is long, parts of it may not be shown in some
screens.
76
SQT0816
shows the text you have
entered
6 7 8 9 0
 Delete
y u i o p
 Finish
h j k l .
n m * #
@
- , ; ' "
Other Characters
Switching the aspect ratio of the
screen
When the image does not match the screen size of
the TV, you can enlarge the image to fill the screen.
1
Press [DISPLAY].
2
Select "Aspect" in "Basic Operation", then
press [OK].
3
Select the item, then press [OK].
Normal:
Normal output
Side cut:
The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged.
Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged.
• This function does not work when watching 3D programme
and playing back 3D title or 3D photo.
• It may also be adjusted using the screen mode of the TV,
etc.
• The screen mode is switched to "Normal" in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
• When "TV Aspect" ( 68) is set to "Pan & Scan" or
"Letterbox", the "Zoom" effect is disabled.

HOLD function

The HOLD function deactivates all buttons on the
unit and remote control.
Press and hold [OK] and [RETURN
simultaneously until "X HOLD" appears on the
front panel display.
To cancel the HOLD function
Press and hold [OK] and [RETURN
simultaneously until "X HOLD" disappears.
]
]