Copying Video; Copying Titles - Panasonic DMR-HWT250 Operating Instructions Manual

Copying video

Copying titles

Copying video
"For recorded titles (
§
• The title in the source media will be deleted.
• The recording mode cannot be changed.
1
Connect the USB HDD.
2
Press [FUNCTION MENU].
3
Select "Recorded Programmes" in
"Contents on HDD", then press [OK].
4
Select the title, then press the yellow
button.
A check mark is displayed. Repeat this
step.
Channel
• Press the yellow button again to cancel.
5
Press the blue button.
6
Select "Yes", then press [OK].
• If you select "No", you can change the
selection. (
selection)
44
SQT0816
§
9)" only
Date Title Name
Start Time 9:00 AM Rec time
Prog.Type: Movie
right, To change the
7
Set other settings, then press [OK].
e.g.,
Automatic Standby after Copy
Standby status can be changed if required.
Please press OK to start copying.
OK
RETURN
( below, Setting the copying options)
8
Select "Yes", then press [OK].
To register the external HDD (USB HDD)
Refer to "Registering the USB HDD". (
To copy video files
Refer to "Copying video files". (
To change the selection
1 Select "No", then press [OK] in step 6 (
2 Select the title, then press the yellow button.
Repeat this step to select titles.
3 Go to step 5 ( left).
About screen icons on the Video Menu
Refer to "Screen icons". (
Setting the copying options
1 Select the item in step 7 (
2 Press [2, 1] to change the settings.
• Automatic Standby after Copy
On:
This unit is turned to standby mode when it is
not operated for approximately 5 minutes
after completing copy.
Off
59)
45)
left).
34)
above).