Picture; Sound - Panasonic DMR-HWT250 Operating Instructions Manual

Picture

Still Mode
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when "Automatic" is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when "Automatic" is selected. (The
picture is clearer and finer.)

Sound

Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select "Surround encoded", when the
connected equipment supports the virtual
surround function.
• There is no effect on "Bitstream" via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in "Stereo" in the
following cases.
- AVCHD playback
Bilingual Audio Selection
Select whether to record the audio type ("M1" or
"M2") when File Conversion (
Digital Audio Output
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio Type for Digital Broadcast
If the programme has more than one track (Dolby
Digital, etc.), you can set priorities.
• This setting will give effect in the following
42).
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
• On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
• Off:
Signals are output as 96 kHz.
• The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- The signals have a sampling frequency
of over 96 kHz.
Dolby Digital
MPEG
Select the audio signal to output.
• Select "PCM" when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
conditions.
- The default setting when watching
broadcasts.
- The default setting when playing back the title
recorded in DR mode.
- File Conversion ( 42)
Convenient functions
67
SQT0816