Connecting Directly To The Projector - Sony VPH-D50HTU Installation Manual

Connecting Directly to the Projector

When multiple input sources are connected to the projector
TRIGGER
IN OUT
RS-422A
PLUG IN POWER
CONTROL S REMOTE
Color monitor
Video equipment
30
(GB) Connections
Rear
IN OUT
Y IN
ABL LINK
IN OUT IN
VIDEO S VIDEO
to video input
to video output
to S Video output
Setting up
• Set INPUT-A in the SET SETTING menu to RGB and INPUT-B to
COMPONENT.
For details, see "The SET SETTING Menu" on page 48 (GB).
• Select VIDEO or S VIDEO by pressing the INPUT SELECT keys on the
remote control or by setting VIDEO in the INPUT SELECT menu.
For details, see "The INPUT SELECT Menu" on page 42 (GB).
• Switch the 75-ohm terminate connectors according to the connections of
the computer and color monitor.
For details, see "Switching the Connectors" on page 27 (GB).
C IN
R G B SYNC/HD VD
OUT C /R-Y/P Y C /B-Y/P R
R R B B
C /R-Y/P
R
INPUT A
VIDEO
to RGB output
Video equipment Video equipment
SYNC/HD
G B VD
Y C /B-Y/P
R B B
Y C
INPUT B
to component output