Modifying Parts; Removing The Upper Cover; Changing The Polarity - Sony VPH-D50HTU Installation Manual

Modifying Parts

Removing the Upper Cover

Changing the Polarity

20
(GB) Installation
1
Turn off the main power of the projector.
2
Unlock the two screws on the projector by using a screwdriver or a
coin edge, and then open the upper cover.
3
Slide the upper cover towards the rear and lift it to remove.
The polarity of the projector is adjusted to use the projector for front
projection on the floor.
When the projector is installed on the ceiling or used in rear projection, it
is necessary to change the settings of the polarity switch and the polarity
connectors.
Locked Unlocked