Basic Cordless Handset Operation - AT&T E1126 User Manual

MUTE
CHAN REDIAL
12345678901
MUTE CHAN REDIAL
Redial
Telephone Operation Telephone Operation

Basic cordless handset operation

Making and answering calls
To answer an incoming call, press
or any dial pad key). To make a call, press
, then dial a number. Press
SPEAKER
cordless handset back in the base to hang up.
To preview numbers before dialing, enter numbers first,
then press or
PHONE SPEAKER
time to make corrections as you are entering numbers.
The screen displays the elapsed time as you talk (in
hours, minutes and seconds).
NOTE: The elapsed time format is in minutes and seconds "MM:SS"
until one hour has elapsed, then it will change to hours, minutes and
seconds "H:MM:SS".
Pressing to access services from your local telephone service provider
FLASH
will not affect the elapsed time.
Hands-free speakerphone calls
To answer a call, press
SPEAKER.
, then dial a number. During a call you can press
SPEAKER
to toggle between hands-free speakerphone
SPEAKER
and normal cordless handset use. Press
Last number redial
Press on the cordless handset to display the
REDIAL
last number called (up to 32 digits). To dial the number
displayed, press or
PHONE
or , press
PHONE SPEAKER
ber dialed.
To delete this number, press
phone is not in use. This will clear the redial memory
and leave it blank.
Temporary ringer silencing
Press while the phone is ringing to temporarily turn
OFF
off the ringer. The next phone call will ring normally. You
can answer the call or let the caller leave a message.
This will silence the ringer without disconnecting the call.
If your answering system is on, the caller will be asked to
leave a message.
12 12
(or
PHONE SPEAKER,
PHONE
or place the
OFF
V
to dial. Press
To make a call, press
to hang up.
OFF
Or, after pressing
SPEAKER.
to call the last num-
REDIAL
twice when the
REDIAL
or
at any