AT&T E1126 User Manual page 15

DIAL MODE: TONE
MESSAGE WAITING
CLEAR? YES
LANGUAGE
Telephone Operation
Cordless handset programming
Choose dial mode
The dial mode defaults to TONE. If you do not have
touch tone service, you'll need to change the setting to
pulse by following these steps:
1. Press to begin programming.
MENU
^ V
2. Press or until the screen displays DIAL
MODE : and the current setting.
3. Press to start changing current setting.
SELECT
^ V
4. Press or to display TONE or PULSE.
5. Press to choose displayed dial mode and
SELECT
exit.
Clear Voice Mail (for all cordless handsets)
If you subscribe to voice mail service provided by your
local telephone company, you will be alerted to new
voice mail messages in two ways. When you press
, the dial tone will toggle on and off (stutter
PHONE
tone) and you will receive a text message on the cord-
less handset. To manually remove the stutter tone and
message on the cordless handset
MESSAGE WAITING
screen:
• Press .
MENU
^ V
• Press or until the screen displays
.
WAITING
^
• Press then
SELECT
Press to select
•
SELECT
NOTE: This only turns off the displayed message on the cordless handset
screen; it does not delete your voice mail message(s). Use this feature
when the phone indicates there is voice mail when you have none or you
have accessed your voice mail from a different phone line (while away
from home). If there actually is a new voice mail message, your local tele-
phone company will continue to send the message which turns the display
message back on.
Choose cordless handset display language
Your phone will default to English handset screen dis-
plays. If you wish to change them to Spanish, follow
these steps:
1. Press to begin programming.
MENU
^ V
2. Press or until the screen displays
LANGUAGE .
3. Press to start changing current setting.
SELECT
^ V
4. Press or to display ENGLISH or ESPANOL .
5. Press to choose displayed language and exit.
SELECT
11
MESSAGE
V
or to choose .
YES
and exit.
YES