❷ Making Connections; Connecting Your Computer - Dukane 6230WA User Manual

❷ Making Connections
NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode
and before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power manage-
ment software.
Enabling the computer's external display
Displaying an image on the notebook PC's screen does not necessarily mean it outputs a signal to the projector.
When using a PC compatible laptop, a combination of function keys will enable/disable the external display.
Usually, the combination of the "Fn" key along with one of the 12 function keys gets the external display to come on
or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through
external display selections.

Connecting Your Computer

NOTE: Signals supported by Plug & Play (DDC2)
COMPUTER IN
analog
Yes
A commercially available USB cable
(compatible with USB 2.0 specifications)
Stereo mini-plug audio
cable (not supplied)
INPUT
HDMI 1 IN HDMI 2 IN
digital
Yes
digital
Yes
HDMI 1 IN
COMPUTER IN
USB-B
AUDIO IN
HDMI cable (not supplied)
Use High Speed HDMI
Cable.
122
6. Installation and Connections
HDMI 2 IN
Computer cable (VGA) (supplied)
To mini D-Sub 15-pin terminal on
the projector. It is recommended
that you use a commercially
available distribution amplifier if
connecting a signal cable longer
than the cable supplied.
NOTE: For Mac, use a commercially
®
available pin adapter (not sup-
plied) to connect to your Mac's
video port.