❷ Making Connections
A computer cable, HDMI cable, or a DisplayPort cable can be used to connect to a computer.
The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection.
Analog RGB signal connection
•
Connect the computer cable to the monitor
video input terminal on the projector. Please use a computer cable attached with a ferrite core.
Computer cable (sold commercially)
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER IN
out terminal (mini D-sub 15 pin) on the computer and the computer
COMPUTER IN
NOTE:
• Please check the operating manual of the computer as
the name, position and direction of the terminal may
differ depending on the computer.
INPUT button on the projector
cabinet
7:COMPUTER
AUDIO IN
AUDIO OUT
Stereo mini-plug audio cable (not supplied)
Button on the remote control
143
6. Installation and Connections
7/COMPUTER