Network Settings - Dukane 6230WA User Manual

NETWORK SETTINGS

• SETTINGS
WIRED or WIRELESS
SETTING
APPLY
DHCP ON
DHCP OFF
IP ADDRESS
SUBNET MASK
GATEWAY
AUTO DNS ON
AUTO DNS OFF
Setting for WIRED LAN
ENABLE
DISABLE
Setting for WIRELESS LAN (with the optional USB Wireless LAN Unit equipped)
SIMPLE ACCESS POINT
MODE
CHANNEL
PROFILE 1/PROFILE 2
SSID
SITE SURVEY
Set for wired LAN or for wireless LAN.
Apply your settings to wired LAN or wireless LAN.
Automatically assign IP address, subnet mask, and gateway to the projector from your
DHCP server.
Set IP address, subnet mask, and gateway to the projector assigned by your network
administrator.
Set your IP address of the network connected to the projector.
Set your subnet mask number of the network connected to the projector.
Set the default gateway of the network connected to the projector.
DHCP server will automatically assign IP address of DNS server connected to the
projector.
Set your IP address of DNS server connected to the projector.
Turn on wired LAN connection
Turn off wired LAN connection
Set the projector for simple access point.
Available channels vary depending on the country and region. When you select [IN-
FRASTRUCTURE], make sure that the projector and your access point are on the
same channel.
Available channels vary depending on the country and region. When you select [IN-
FRASTRUCTURE], the access point same with the wireless LAN is selected automati-
cally.
Two settings can be set for wireless LAN connection. Select PROFILE 1 or PROFILE
2.
Enter an identifier (SSID) for wireless LAN. Communication can be done only with
equipment whose SSID matches SSID for your wireless LAN.
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you
can access.
48
3. Convenient Features