[Options(2)] - Dukane 6230WA User Manual

[OPTIONS(2)]

Selecting Standby condition in [STANDBY MODE]
The projector has two standby modes: [NORMAL] and [NETWORK STANDBY].
The [NORMAL] mode is the mode that allows you to put the projector in the power-saving condition which consumes
less power than the [NETWORK STANDBY] mode. The projector is preset for the [NORMAL] mode at the factory.
NORMAL �����������������������������POWER indicator: Red light/STATUS indicator: Off
NETWORK STANDBY ����������POWER indicator: Orange light/STATUS indicator: Off
Important:
- When [NETWORK STANDBY] is selected, [AUTO POWER OFF] will turn grey in color and be disabled, and [0:15] will be selected
automatically.
NOTE:
• Even when [NORMAL] or [NETWORK STANDBY] is selected for [STANDBY MODE], power on or off can be done by using the PC
CONTROL port.
• The power consumption in the standby mode will not be included in calculating CO
• Your setting will not be affected even when [RESET] is done from the menu.
Enabling Direct Power On [DIRECT POWER ON]
Turns the projector on automatically when the power cord is inserted into an active power outlet. This eliminates the
need to always use the POWER button on the remote control or projector cabinet.
When [NORMAL] is selected, only the following buttons and feature will work:
POWER button on the projector cabinet and the remote control, and powering on from PC Control
command�
When [NETWORK STANDBY] is selected, the projector can be turned on over a wired LAN connec-
tion and only the following buttons, port, and features will work:
POWER button on the projector cabinet and the remote control, powering on from PC Control
command, AUTO POWER ON(COMP�), LAN port, wireless LAN unit (optional), Virtual Remote Tool,
LAN feature, and Mail Alert feature�
emission reduction.
2
104
5. Using On-Screen Menu