Intercom - AT&T E1112B User Manual

TONE TONE
MUTE REDIAL
DELETE PAUSE
HANDSET 1
12:45PM
CALLING
OTHER HANDSET

INTERCOM

Telephone operation
Intercom
Use the intercom feature for conversations between
handsets.
1. Press INT. The screen of the originating hand-
set will show CALLING OTHER HANDSET. The
MUTE REDIAL
DELETE PAUSE
destination handset will ring, and its screen will
show OTHER HANDSET IS CALLING.
•
•
2. On the ringing destination handset, press
INT
the intercom call.
To end the intercom call:
• Press
-OR-
• Place either handset in the charger or telephone
base.
Handling incoming calls
The telephone will beep if you receive an outside call
during an intercom conversation. You can either:
• Press
answer the incoming call.
-OR-
• Press INT or
com connection without answering the incoming
call. The incoming call will continue to ring.
NOTES:
Before the intercom call is answered, you can cancel the
intercom call by pressing
If the destination handset is not answered within 100
seconds or if it is in the directory or call log mode, or out
of range, the originating handset will show the message
NOT AVAILABLE.
, , or any dial pad key (0-9, * or #) to answer
SPEAKER
:
NOTE On the ringing destination handset, pressing
or MUTE/ will temporarily silence the intercom ringer.
DELETE
OFF/
CLEAR
PHONE/
FLASH
OFF/
16 16
OFF/
CLEAR
or INT on either handset.
to end the intercom call and
to disconnect the inter-
CLEAR
or INT.
,
PHONE/
FLASH
OFF/
CLEAR