Chain Dialing - Uniden DECT 3015 Owner's Manual

To... Press...
inTErcoM/clEar
accept a
transferred other handset. Then, press
call caller.
Privacy Mode
With a call in progress, press
♦
mode. As long as privacy mode is on, you'll see a
no other handsets can join your call.
Privacy mode turns off automatically when you hang up or put the call
♦
on hold; you can also turn it off by pressing
Handset to Handset Intercom
Whenever the phone is in standby, you can make an intercom call
♦
between handsets without using the phone line.
You can make an intercom call from any handset, but only two
♦
handsets can be in an intercom call at any time.
If an outside call comes in during an intercom page, the phone cancels
♦
the page so you can answer the incoming call.
If an outside call comes in during an intercom call, press
♦
hang up the intercom call and answer the outside call.
To...
make an
intercom page
cancel a page
answer a page
end an intercom
call

Chain Dialing

If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Make your call normally.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
MEnu/SElEcT
3. Press
close the phonebook.
14
to answer the page and speak to the
MEnu/SElEcT
Press...
inTErcoM/clEar.
with, or to page all handsets at the same time.
All
End
.
inTErcoM/clEar
End
. Both handsets return to standby.
to send the code. If you change your mind, just
Talk/FlaSh
twice to activate Privacy
MEnu/SElEcT
Select the handset you want to talk
Talk/FlaSh
or .
to speak to the
in the display, and
twice.
Talk/FlaSh
to