Battery - HP Pavilion x2 Detachable Maintenance And Service Manual

Battery

Description
Battery, 2-cell, 33-Wh (includes cable and double-sided adhesive)
Before removing the battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
WARNING!
battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through Windows before removing the
battery.
Remove the battery:
1. Disconnect the four screws(1) from the system board.
2. Disconnect the battery cable (2) from the system board.
3. Detach the battery (3) from the display panel assembly. (The battery is attached to the display panel
assembly with double-sided adhesive.)
4. Remove the battery.
Reverse this procedure to install the battery.
Back cover on page
To reduce potential safety issues, use only the battery provided with the tablet, a replacement
23).
Spare part number
810985-005
Battery 25