Middle Frame - HP Pavilion x2 Detachable Maintenance And Service Manual

Middle frame

Before removing the middle frame, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the back cover (see
a. Battery (see
b. Audio jack board (see
c. Speakers (see
d. Touch board (see
e. System board (see
f. Wireless antenna (see
g. Power/volume button board (see
h. Webcam module (see
Remove the middle frame:
1. Remove the six screws (1) that secure the middle frame to the display panel assembly.
2. Remove the middle frame (2).
Reverse this procedure to install the middle frame.
38 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Back cover on page
Back cover on page
Battery on page 25)
Audio jack board on page
Speakers on page 27)
Touch board on page
System board on page
Wireless antenna on page
Power/volume button board on page
Webcam module on page
23).
23), and then remove the following components:
26)
29)
30)
33)
36)
34)