IBM xSeries 360 Type 8686 Installation Manual page 36

The following illustration shows the indicators on the rear of the server.
Ethernet link LEDs
Ethernet link LEDs: These LEDs (one for the Remote Supervisor Adapter, one for
the network) indicate that the related Ethernet link is operational.
Ethernet TX/RX LEDs: These LEDs (one for the Remote Supervisor Adapter, one for
the network) indicate that activity is taking place on the related network.
Remote Supervisor Adapter Ethernet port: This port enables you to manage the
server from a remote location.
Remote Supervisor Adapter fault LED: This LED indicates that the Remote Super-
visor Adapter has failed.
Remote Supervisor Adapter power LED: This LED indicates that power is being
supplied to the Remote Supervisor Adapter.
Ethernet port: This port enables you to connect the server to a network.
26
IBM xSeries 360 Type 8686:Installation Guide
Ethernet TX/RX LEDs
Remote Supervisor
Adapter Ethernet port
Remote Supervisor
Adapter fault LED
(amber)
Remote Supervisor
Adapter power LED
(green)
Ethernet port