IBM xSeries 360 Type 8686 Installation Manual page 24

First pair
Second pair
Third pair
Fourth pair
5. Touch the static-protective package that contains the DIMM option to any
6. Turn the DIMM so that the DIMM keys align correctly with the slot.
7. Ensure that the DIMM locking latches are in the open position. Insert the DIMM
14
IBM xSeries 360 Type 8686:Installation Guide
synchronous dynamic random-access memory (SDRAM) with error correcting
code (ECC).
DIMM 1
DIMM slot 3
Test button
Test LED to show
capacitor is charged
unpainted metal surface on the server. Then, remove the DIMM from the pack-
age.
Attention: To avoid breaking the DIMM locking latches or damaging the DIMM
slots, handle the latches gently.
by pressing it straight into the slot. Make sure that the locking latches snap into
the closed position. If a gap exists between the DIMM and the latches, the DIMM
has not been properly installed. In this case, open the latches, remove the DIMM,
and reinsert it.
DIMM 1 (J14)
DIMM 3 (J13)
DIMM 5 (J12)
DIMM 7 (J4)
DIMM 3
DIMM 4
DIMMs 1 and 2
DIMMs 3 and 4
DIMMs 5 and 6
DIMMs 7 and 8
Memory board VRM slot (J11)
Test LED to show Test button
capacitor is charged
Memory VRM
DIMM 2
DIMM slot 4
DIMM 2 (J15)
DIMM 4 (J9)
DIMM 6 (J7)
DIMM 8 (J5)