Fiat Ducato Owner's Handbook Manual page 50

Wrapping the bench seat
If after tilting, bench seat wrapping
is required, pull the two levers A-
fig. 66 set under the backrest (as
specified on the plate) and tilt forward
the entire bench seat row (fig. 67).
fig. 66
fig. 67
Downloaded from www.Manualslib.com
Removing the bench seat
IMPORTANT The bench seat
(weighing 75 kg) shall be removed by
two people at least.
To remove the bench seat, lift and
then pull the two levers A-fig.68 (as
specified on the label). Make sure both
levers B-fig.69 are in "released" po-
sition (as specified on the label) (pin C
visible).
fig. 68
manuals search engine
The bench seat is properly released
when the red mark on label (A) on the
mobile part of the bench seat (fig. 70)
is aligned with the green mark (B) on
the fixed part of the bench seat.
fig. 69
fig. 70
GETTING TO KNOW YOUR VEHICLE
49