Fiat Ducato Owner's Handbook Manual page 141

The moving parts of the jack (screw
and joints) may also cause injury if
touched. Clean off any grease.
6) Unscrew the five bolts complete-
ly using wrench E-fig. 6 and remove
the wheel.
fig. 6
140
IN AN EMERGENCY
Downloaded from www.Manualslib.com
7) Fit the spare wheel making sure
that the pegs H fit into holes G-fig. 7.
When fitting the spare wheel, make
sure the hub is clean so that the fix-
ing bolts will not loosen.
8) Tighten the five wheel bolts.
9) Lower the vehicle with the ratch-
et wrench and pull the jack out.
10) Fasten bolts completely, work-
ing in a criss-cross fashion as shown in
fig. 7.
fig. 7
manuals search engine
When you have finished:
– place the wheel you have changed
in the spare wheel support;
– hook the spare wheel support, us-
ing wrench E;
– screw the two fastening bolts and
position the two plastic caps;
– put the jack and the tools back in
the bag under one of the two seats in
the cab.