Fiat Ducato Owner's Handbook Manual page 19

ADJUSTING THE FRONT
SEAT BELT HEIGHT
WARNING
Only adjust seat belt
height when the vehicle is
stationary.
To adjust, press button A-fig. 16 and
raise or lower the grip B-fig. 16.
fig. 16
18
GETTING TO KNOW YOUR VEHICLE
Downloaded from www.Manualslib.com
Always adjust the height of the seat
belt to fit the person wearing it. This
could greatly reduce the risk of injury
in the case of collision.
The belt is adjusted properly when
the webbing passes approximately
halfway between the edge of the
shoulder and the neck.
5 different adjustments in height are
provided.
sure that the loop is attached firm-
ly in one of the preset positions. To
do this, with the button released,
exert a further pressure to allow
the anchoring device to catch if re-
lease did not take place at one of
the preset positions.
manuals search engine
WARNING
After you have made the
adjustment, always make
PRETENSIONERS
Ducato vehicles fitted with airbags
are also fitted with pretensioners to
improve protection.
These devices "feel" that a violent
collision is in progress via a sensor and
pull back a few inches of webbing. In
this way the pretensioners ensure that
the belt is adhering perfectly to the
body before the belt begins to hold
back the wearer.
When the pretensioner has been
triggered the retractor will lock. The
seat belt cannot be drawn back up
even when guiding it manually.