Fiat Ducato Owner's Handbook Manual page 132

Truck and Chassis cab versions -
fig. 12
An additional tow hitch - specific for
chassis cab and truck versions is shown
in fig. 12. The structure Ø must be se-
cured to the points shown with a total
of twelve M 10 screws.
Fit the tow hitch with the light cluster
crossmember in its original position. If
the crossmember has been removed,
replace it with another crossmember
of the same size and resistance.
IMPORTANT Fasten a tag in
clearly visible position at the same
height as the tow hitch. This tag is
compulsory. It must be adequately
sized, made of suitable material and
carry the following information:
MAX ADMITTED LOAD ON
HITCH 80 kg.
WARNING
After assembly, seal the fas-
tening screw holes to pre-
vent exhaust fumes from entering
the vehicle.
Downloaded from www.Manualslib.com
Holes to bore
fig. 12
manuals search engine
Existing holes
2 shims
Vehicle centre line
2 shims
GETTING THE BEST OUT OF YOUR VEHICLE
Holes to bore
131