Using The Phonebook - Uniden XDECT SSE25 Series Owner's Manual

Using Call Waiting
If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received for the waiting call.
For Australia:
Press
FlASH/EXIT
is put on hold, and you will hear the new caller after a short pause. To
return to the original caller, press
For New Zealand:
Press
FlASH/EXIT
and you will hear the new caller after a short pause. To return to the
original caller, press

Using the Phonebook

Each handset can store up to 70 entries in its phonebook.
Open or close the phonebook Press
Scroll through the entries
Jump to entries that start with
a certain letter
Dial an entry
Phonebook menu options
Open the phonebook with the phone in standby, then press
to open the phonebook menu. Choose one of these options:
Create Add an entry to your phonebook. The handset will prompt you to
New enter the name and phone number, and choose a personal ring.
Copy Copy the whole phonebook to another handset. (You must have at
All least two handsets to use this feature.)
Delete Erase all the entries in this handset's phonebook. (This does not
All affect the entries saved on any other handsets.)
Phonebook entry options
With the phone in standby, open the phonebook and find the entry you
want. Press
SElECT/mENU
Choose one of these options:
Edit this entry. The handset will prompt you to edit the name and
Edit
phone number, and choose a personal ring.
12
and then press
to accept the waiting call. The first caller is put on hold,
again.
FlASH/EXIT
Press
from A to Z or
Press the number key corresponding to the
letter you want to jump to.
Find the entry you want to dial and press
(or
to open the individual phonebook entry menu.
to accept the waiting call. The first caller
2
and then
FlASH/EXIT
PHONEBOOK/LEFT
to scroll through the phonebook
DOWN
to scroll from Z to A.
UP
).
SPEAKEr
again.
2
.
SElECT/mENU
TALK