Toshiba GA-1200 Administration Manual page 23

Setup procedure
1
Set up the DNS server and SMTP server.
Set up the DNS server and SMTP server to enable Internet connection and InternetFax/
Email transfer. To enable SMTP transfer to the equipment, you also need to set the host
name (domain name) and MX record of the equipment in the DNS server.
P.24 "Setting up DNS Server and Mail Server"
2
Set up the TCP/IP and the HTTP Network Service to enable
TopAccess.
Set up the TCP/IP and HTTP Network Service from the control panel. TopAccess is
enabled by this setup.
Setup Guide for Printing Functions
Chapter 5 "CONFIGURING NETWORKS (EQUIPMENT)"
TCP/IP Configuration
HTTP Configuration
Chapter 10 "TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing
Function)"
Setting up Network Settings (Printing Function)
Setting up the TCP/IP
Setting up the HTTP Network service
The setup for the network environment has been completed. Use the TopAccess to make
settings for the equipment in the following procedure.
3
Set up the DNS session.
To enable the DNS server, specify the DNS server to which the host name (domain
name) and MX record of the equipment have been set.
Setup Guide for Printing Functions
Chapter 10 "TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing
Function)"
Setting up Network Settings (Printing Function)
Setting up the DNS session
4
Set up the DDNS session if required.
If the DNS server supports the dynamic DNS, set up the DDNS session.
Setup Guide for Printing Functions
Chapter 10 "TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing
Function)"
Setting up Network Settings (Printing Function)
Setting up the DDNS session
Setup Flow for InternetFax Features 21