Sound; Setting Vibration; Setting Volume; Setting Call Forwarding - Pantech Burst User Manual

Setting DTMF Tones
DTMF (Dual Tone Multi Frequency), better known as touch-
tone, is a system of signal tones used in telecommunications.
With DTMF, each key you press on your phone generates two
tones of specific frequencies. So that a voice can't imitate the
tones, one tone is generated from a high-frequency group of
tones and the other from a low frequency group.
1. Tap Settings > Call settings > DTMF Tones.
2. Tap Normal or Long.
3. Tap OK.
Setting Caller ID
1. Tap Settings > Call settings > Caller ID.
2. Tap Network default, Hide number or Show number.
3. Tap OK.

Setting Call forwarding

1. Tap Settings > Call settings > Call forwarding.
2. Tap Always forward, Forward when busy, Forward when
unanswered or Forward when unreachable.
Note The user may be charged for this service.

Setting Call waiting

1. Tap Settings > Call settings > Call waiting > Call waiting.
Setting Noise Suppression
1. Tap Settings from the applications menu.
2. Tap Call settings > Noise Suppression.
- By tapping the Noise Suppression, you can activate the
function. The check box is selected by default.

Sound

Setting silent mode
1. Tap Settings > Sound > Silent mode. All other functions
except the media volume and alarms are silenced if you
select this option.
2. Tap Silent mode again to activate all functions.

Setting vibration

1. Tap Settings > Sound > Vibrate.
2. Tap Always, Never, Only in Silent mode or Only when not
in Silent mode.
3. Tap OK.

Setting volume

1. Tap Settings > Sound > Volume.
Make sure to deselect Silent mode.
2. Adjust the volume for ringtone,
media and alarm. Tap Use
incoming call volume for
notifications if you want to use this
function. Otherwise, deselect it and
adjust the volume for notifications.
3. Tap OK.

Setting phone ringtone

1. Tap Settings > Sound > Phone ringtone.
2. Select and tap a ringtone in the list.
3. Tap OK.
75
Settings