Alarm/Clock; Deleting An Alarm - Pantech Burst User Manual

Tools
4. Tap Lap > Split on the top of the screen and tap Start. This
function is used when you want to measure the accumulated
time.
5. Tap Reset to restart the stopwatch.
Lapping time

Alarm/Clock

Alarm/Clock helps set the alarm and see basic information on
your region including time and weather. Desk clock is provided
by default.
Adding a new alarm
1. Tap Alarm/Clock from the applications menu.
2. Tap Add alarm.
3. Enter the hour and the minute and tap Set.
4. Adjust settings for alarm and tap Done. You will see a green
bar under the set alarm.
Splitting time
64
Desk Clock
Changing an alarm
1. Tap Alarm/Clock from the applications menu.
2. Select and tap an alarm time to change.
Or press and hold an alarm to edit.
3. Adjust settings and tap Done.
Deactivating an alarm
1. Tap Alarm/Clock from the applications menu.
2. Tap of the alarm to deactivate.
Note A green bar indicates that the alarm is on. The color disappears
when the alarm is turned off.

Deleting an alarm

1. Tap Alarm/Clock from the applications menu.
2. Press and hold the alarm to delete, and tap Delete alarm.
3. Tap OK.
Adding an alarm