Connecting To A Mobile Network; Using Bluetooth - Pantech Burst User Manual

Adding a Wi-Fi network
1. Tap Settings from the applications menu.
2. Tap Wireless & networks > Wi-Fi settings.
3. Tap Wi-Fi to activate the function.
4. Tap Add Wi-Fi network.
5. Enter Network SSID and select the security type among
Open, WEP, WPA/WPA2 PSK, or 802.1x EAP. Aside from
Open, you must enter a password for the network.
6. Tap Save.
Disconnecting a Wi-Fi network
1. Tap the network that is connected to the phone.
2. Tap Forget to disconnect the network.
Note You can also disconnect the Wi-Fi network by pressing and
holding the network and tapping Forget network.

Connecting to a Mobile Network

You can use 3G (or EDGE if available) or 4G(LTE) to connect
the phone to the Internet and exchange multimedia messages.
You will need a data plan to access a 2G, 3G or 4G network.
The settings are already preconfigured on the phone, and it
is ready to use 3G or 4G services. Please do not change the
settings: this may cause services to stop working.
Note Using 3G or 4G loads Internet data faster in some cases, but
may decrease battery performance. When you use 3G or 4G, data
charges may be imposed.
Note When data is transmitted over the network, sound interferences
may occur near electronic products like audio players or telephones.

Using Bluetooth

Bluetooth function enables wireless connections between
electronic devices. Using this function, you can send images,
text, and business cards.
With Bluetooth function, the phone provides:
Connection to hands-free devices.
Connection to electronic devices.
Pairing with devices
1. Tap Settings from the applications menu.
2. Tap Wireless & networks > Bluetooth settings.
3. Tap Bluetooth to activate the function.
4. Tap Scan for devices.
5. Select and tap a device from the list.
6. Tap Pair to connect to and pair with the device.
Scanning devices
23
Connectivity
Requesting pairing