Philips PVD1075 Training page 22

Hide thumbs Also See for PVD1075:

SW Upgrade

B) PANEL firmware upgrade

8. Unzip the wtva750.ROM

(different file from step

9. Drag-n-drop to USB drive

10. Power on the main set with AC/DC adaptor

11. Insert USB drive to the USB port of the main set

12. The set will detect the updated firmware

13. Press "OK" button on remote control to confirm and proceed

14. After upgrade completed, the set will power off, and you can

remove the USD drive

Warning: Do not unplug the AC adaptor during firmware upgrade

to prevent flash corrupt of the set!!

Euroservice, Support&Training, Theo Heijnen, December, 2007

Table of Contents