SW Upgrade.
Procedure on how to upgrade the software of the Portable TV
Check www.philips.com/support for latest software
upgrades available.
A) MPEG firmware upgrade
1. Unzip the wtva750.ROM
2. Drag-n-drop to USB drive
3. Power on the main set with AC/DC adaptor
4. Insert USB drive to the USB port of the main set
5. The set will detect the updated firmware
6. Press "OK" button on remote control to confirm and proceed
7. After upgrade completed, the set will power off, and you can remove
the USD drive
Warning: Do not unplug the AC adaptor during firmware
upgrade to prevent flash corrupt of the set!!
21
Euroservice, Support&Training, Theo Heijnen, December, 2007