Wiring Layout; Motor Cable; Electronic Module - DeWalt DW718 Service Repair Training

Strip Down Guidelines / Procedures
4.2.3

Wiring Layout

go to:
INDEX - PREVIOUS - NEXT
4 Repair Instructions

Motor Cable

White - connects to Red from Electronic
Module.
Yellow - connects to Terminal 2 on switch –
Bottom.
Red - connects to Terminal 2 on switch – Top.
Black – connects to Terminal 1 on switch –
Top.

Electronic Module

Red - connects to White from the motor.
White - connects to White from the connector
block plus Black from the suppressor.
Black - connects to Terminal 1 on switch -
Bottom plus Black from the suppressor.
White/Orange – Plugs into the potentiometer.
DW718