Handle Wiring - DeWalt DW718 Service Repair Training

3
go to:
INDEX - PREVIOUS - NEXT
Service Drawings

Handle Wiring

Motor Cable
•White - connects to Red from
Electronic Module.
•Yellow - connects to Terminal 2 on
switch – Bottom.
•Red - connects to Terminal 2 on
switch – Top.
•Black – connects to Terminal 1 on
switch – Top.
Electronic Module
•Red - connects to White from the
motor.
•White - connects to White from
the connector block plus
Black from the suppressor.
•Black - connects to Terminal 1 on
switch - Bottom plus Black
from the suppressor.
•White/Orange – Plugs into the
potentiometer.
DW718