Axis P5635–E User Manual page 63

AXIS P5635–E PTZ Dome Network Camera
Troubleshooting
Video cannot be recorded
SD card cannot be mounted
Product does not function in cold environment
Arctic Temperature Control*/
Temperature Control
* Arctic Temperature Control valid for specific products only
Text overlay about PTZ errors
Text overlay about PTZ errors
"Not enough power for both
camera and pantilt motors"
Check that the SD card is not write protected (that is, read only).
Reformat the SD card and then click Mount.
NOTICE TICE
NO NO TICE
Formatting the card will remove all content, including all recordings, from the SD card.
During startup in a cold environment, function in the mechanical parts is suspended until they
are sufficiently heated.
In case the pan/tilt drive components or the camera components experience a problem that cannot
automatically be corrected, this text overlay will appear and the PTZ Status in System Options
> Maintenance will be set accordingly. The problem may be caused by physical blocking of the
mechanics, heavy vibrations, mechanical wear or other malfunction. In some cases the problem
might be temporary and can be resolved in the next movement or after pressing the Test button
under System Options > Maintenance > PTZ Status.
The camera does not get enough power for both the camera and the motors after negotiating with
the Power Sourcing Equipment (PSE), for example an injector or midspan.
Please restart the PSE by unplugging the mains adapter and/or restart the camera.
63