Repainting The Camera - Axis P5635–E User Manual

AXIS P5635–E PTZ Dome Network Camera

Repainting the Camera

Repainting the Camera
The top cover can be repainted to match the installation environment.
The material used in the covers is ASA+PC. Use paint suitable for this material.
1. Remove the three mounting screws.
2. Remove the three top cover screws (T20) and remove the top cover.
3. Repaint the top cover.
4. Assemble the top cover. Use the triangular marking (4) to position it correctly.
5. Fasten the top cover screws (3) with a torque of 2.5 Nm (T20).
6. Fasten each of the mounting screws (1) equally, with a torque of 2.5 Nm at the positions marked with dots. It is very
important to tighten all the screws carefully to prevent the camera from vibrating during operation.
1
Mounting screws (3)
2 Top cover
3
Top cover screws (3)
4
Guide key
1
3
4
1
3 1
59
2