Table of Contents
Advertisement
TV + antenna or cable without a cable box
Use this hook-up to:
•
connect the incoming cable or antenna to the ANT-A input
terminal on the TV.
equipment you will need:
If you have a standard 75-ohm coaxial cable, you will not need
additional equipment. If your antenna has two leads (called twin
lead or 300 ohm antenna lead), you will need:
300 ohm - in
75 ohm - out
One 300-75 ohm matching transformer
procedure:
† Use a screwdriver to connect the 300 ohm twin leads to the
transformer.
¢ Push the 75 ohm side of the transformer onto the ANT-A
terminal on the TV.
Basic Connections
9
Advertisement
Table of Contents
