Table of Contents
Advertisement
Three lengths of
75 ohm coaxial cable
⁄Important: If you are connecting a Super VHS (S-VHS) VCR, use an S-Video
⁄Important: If your VCR is monaural (non-stereo), connect a single RCA pin-
⁄Important: If your VCR has a video channel switch with an "OFF" position, set
TV + VCR + cable with a cable box when TV
GUIDE Plus + will not be used
Use this hook-up to:
•
connect a VCR along with your cable and cable box, when you
will not be using TV GUIDE Plus+
equipment you will need:
One set of RCA pin-
type audio cables
procedure:
† Connect the incoming cable to the ANT-A terminal on back of
the TV.
¢ Connect a coaxial cable from the LOOP-OUT terminal on the
back of the TV to the cable box IN terminal.
£ Connect a second cable from the OUT terminal on the cable box
to the ANTENNA IN terminal on the back of the VCR.
® Connect a third coaxial cable from the ANTENNA OUT termi-
nal on the back of the VCR to the ANT-B terminal on the back
of the TV.
© Connect an RCA pin-type video cable from the VIDEO OUT
terminal on the back of the VCR to the VIDEO INPUT 1 or
INPUT 2 terminal on the back of the TV.
cable instead of an RCA pin-type video cable. Connect this cable to
the S-VIDEO OUT terminal on the VCR. Connect the other end of
this cable to the S-VIDEO INPUT 1 or INPUT 2 terminal on the
back of the TV.
§ Connect a set of RCA pin-type audio cables to the AUDIO OUT
terminals on the back of the VCR. Use the red cable to connect
the right (R) channel and the white cable to connect the left (L)
channel. Connect the other ends of this cable to the AUDIO
INPUT terminals on the back of the TV.
type audio cable. Connect the cable from the VCR's AUDIO OUT
terminal to the left (L) AUDIO INPUT on the back of the TV.
it to "OFF". See your VCR owner's guide for details.
Basic Connections
One RCA pin-type
video cable (if connec-
ting a standard VCR)
One S-Video cable
(if connecting a
S-VHS VCR)
13
Advertisement
Table of Contents
