Table of Contents
Advertisement
IN
OUT
OUT
one two-way splitter
one set of RCA pin-
type audio cables
⁄ ⁄ ⁄ ⁄ ⁄
Important TV GUIDE Plus+ can control only those types of cable boxes and
TV + VCR + cable with a cable box when TV
GUIDE Plus + will be used
Use this hook-up to:
•
connect a VCR along with a cable box and use TV GUIDE Plus+
equipment you will need:
four lengths of 75 ohm coaxial cable
One RCA pin-type
video cable
VCRs that can select channels by using the number keypad on their
remote controls.
procedure
† Connect the cable system's incoming cable to the IN terminal
on the two-way splitter.
¢ Connect a coaxial cable to one of the OUT terminals on the
splitter; connect the other end of this cable to the ANT-B
terminal on the back of the TV.
£ Connect a second coaxial cable to the other OUT terminal on
the splitter; connect the other end of this cable to the IN termi-
nal on the cable box.
® Connect the third coaxial cable to the OUT terminal on the
back of the cable box; connect the other end of this cable to the
ANT-A terminal on the back of the TV.
© Connect the fourth coaxial cable from the CABLE LOOP-OUT
terminal on the back of the TV to the ANTENNA IN terminal
on the back of the VCR.
Basic Connections
IR Transmitters
Transmitter Lenses
IR Emitter Connection
one IR emitter
(provided with TV)
One S-Video cable
(if connecting a S-VHS
VCR)
21
Advertisement
Table of Contents
