Table of Contents
Advertisement
TV + DVD player with component video outputs
After you have completed the basic connections (TV to antenna,
cable, VCR and TV GUIDE Plus+ emitter assembly) outlined in the
previous pages, you can use the folllowing hookup to:
Use this hook-up to:
• view a very high resolution picture using your DVD player or
other video product with component video outputs.
equipment you will need:
three single RCA pin-
type video cables
† Connect one end of the Component Video cable or one end of the
three video cables to the VIDEO OUT Cb terminal on the back
of the DVD player. Connect the other end to the Cb terminal
DVD VIDEO on the back of the TV.
¢ Connect one end of the Component Video cable or one end of
the three video cables to the VIDEO OUT Cr terminal on the
back of the DVD player. Connect the other end to the Cr
terminal DVD VIDEO on the back of the TV.
£ Connect one end of the Component Video cable or one end of
the three video cables to the VIDEO OUT Y terminal on the
back of the DVD player. Connect the other end to the Y termi-
nal DVD VIDEO on the back of the TV.
® Connect a set of RCA pin-type audio cable to the AUDIO OUT
terminals on the back of the DVD player. Connect the other
ends of these cables to the DVD audio input terminals on the
back of the TV. Use the red cable to connect the right (R)
channel and the white cable for connecting the left (L) channel.
⁄Important: DVD signals are sometimes referred to as "COMPONENT DVD" or
"Y, Cr, Cb" signals.
Additional Component Connections
OR one component
video cable with
with three RCA pin-
type connectors on
each end
procedure:
one set of RCA pin-type
audio cables
29
Advertisement
Table of Contents
