Mechanical Adjustments - Mitsubishi Electric Digital Light Processing WD-52525 Technical Training Manual

Mechanical Adjustments

A certain amount of disassembly is required before the
mechanical adjustments can be perform. The cabinet
COVER-BACK and Rear Plate must be removed. Re-
fer to Chapter 2 for the back removal procedures.
The Front cover must be removed to give access to the
Light Engine Adjuster assembly, and the small mirror
adjuster assembly. Figure 4-4 illustrates Front Cover
removal on the V26 and V26+ models. Figure 4-5
shows the required Front Cover disassembly on the
V26++ models.
4-3