Installing The Replacement Light Engine - Mitsubishi Electric Digital Light Processing WD-52525 Technical Training Manual

Installing The Replacement Light
Engine
1) Install the DMD Heat Sensor,. Optical Unit
bottom plate, and black support bracket on the
new Light Engine.
2) Reverse the removal procedure to install the
new Light Engine on the Adjuster assembly.
CAUTION: Take care that the sponge around
the Lens does not cover any part of the Lens
opening..
After installation, data from the new Light En-
gine must be transferred to the chassis and the
following adjustments checked:
• Horizontal Centering
• Vertical Centering
• Picture Rotation
• Vertical Keystone Distortion
• Horizontal Keystone Distortion
The Data Transfer and Adjustment Procedures are
given in Chapter 4.
3-4