External Equipment Setup (Option); Speed Source; Speed Source Window - Furuno GP-1650WF Installation & Maintenance

3.5

External Equipment Setup (Option)

This section shows you how to set up the GP-1650WF/WDF when external equipment is
connected. If a water temperature/speed sensor is installed, you should complete this
section with the boat in the water and running, to confirm speed/water temperature readout.

Speed Source

1. Press the [MENU] key.
2. Press the DISPLAY OPTIONS, NEXT PAGE soft keys to show the DISPLAY SETUP2
menu.
3. Select SPEED SOURCE, EDIT soft keys to show the SPEED SOURCE window.
4. Select source of speed; OWN PDDWHL (speed sensor) or GPS.
The selected item is indicated by black button. Adjust speed when you select OWN
PDDWHL. Refer to Speed Adjustment shown below.
5. Press the ENTER soft key.
GPS
SPEED SOURCE
OWN XDCR
TEMP SOURCE
OFF
TEMP GRAPH
OFF
ZOOM MARKER
+0.0%
SPEED ADJ.
+0.0 F
TEMP ADJ.
+0.0 ft
DEPTH ADJ.
SPD TEMP
0.0 --.-
F
kt
GPS 3D
Display setup 2 menu
SPEED SOURCE
OWN PDDWHL
GPS

Speed source window

DISPLAY
SETUP2
EDIT
PREV.
DEPTH
PAGE
----.-
ft
RETURN
3. INITIAL SETTINGS
3-7